Wood Boiler Treatment 1Qt., G2 W/Chemical Detection Technology

Description

1 Qt. Bottle Boiler Treatment
This will treat up to 200 Gallons!
Chemical Indicator Technology
The GEN2 Treatment
The Gen2 Treatment Solution 101 now contains a specific component that allows chemical detection and chemical level.
Monitoring to be done visually with a simple sample from the system. When you draw a sample from your system the water will be colored various shades of
pink
(watermelon).
Use a white sheet of paper as a background.
A
strong
pink
indicates great protection.
If only a
light pink
undertone appears or if your color has faded from previous samplings, either situation indicates the need for another dose.
Remember with G2 overdosing is not a critical issue.
Simple and Handy.
We still recommend testing the system as least annually as nothing replaces testing to be sure of proper chemical levels and system protection.
Outdoor Boiler Anti-Corrosion Chemical Treatment, a proprietary outdoor wood boiler specific product - the consumer solution.  Developed by professionals in the field of industrial water treatment.
Will work in all makes and models of outdoor wood boilers.
Full spectrum of corrosion inhibitors for both ferrous (iron) and yellow metal (copper and brass) system components for complete corrosion protection for your boiler and heat exchanger alike.
An additional ferrous corrosion inhibitor is added that actually enables better film formation on the metal surface providing and forming a protective barrier.
Calcium scale retarding polymers are added to help keep your heat transfer surfaces clean and efficient. Formulation has the ability to fight under deposit corrosion.
Completely buffered and stabilized product. Easily test for chemical level with approved and inexpensive testing methods.
This is the most concentrated product on the market with these capabilities 1 quart will treat a full 200 GALLONS of boiler fill water.
Shelf life of 2 years. Compatible with glycol (antifreeze) This is the easiest and simplest product to use with the BEST in protection.
Dosage:
1 quart per 200 gallons of system fill water.
Directions for use:
Add treatment directly to system following the recommended dosage rate.
Test and maintain at all times a level of 750-1000 ppm of chemical residual using an approved testing method.
Add additional chemical as necessary in order to maintain this level.
Not intended for systems containing aluminum or aluminum alloy components.